Android Studio is one of the best IDEs for Android apps development, but with legacy computers, it is very slow. To run it on a Dell Vostro 3546, here's what I had to do. Upgrade hardware Minimum RAM required is 8 gb. The laptop came with 4 gb DDR3 1600 Mhz RAM which was slow, … Continue reading How to improve speed of Android Studio on a legacy computer
Open a terminal window and enter the following to find out technical information of an SSD installed in the computer using Linux. $ sudo hdparm -i /dev/sda <enter> /dev/sda:Model=CT500MX500SSD1, FwRev=M3CR043 Visit https://www.crucial.in/support/ssd-support/mx500-support to check if there is a firmware upgrade for the SSD.
The humble Dell Vostro 3546 is an old laptop from 2014, which came with an Intel 4th Generation 4210U processor, 1 TB SATA 5400 rpm hard disk and 4 GB DDR3 (low voltage) 1.35V RAM. It worked fine till now even when it ran Linux Mint 20.3 with Blender 3D. However, everytime an Android app … Continue reading How to install Linux Mint 20.3 on Crucial MX500 SATA SSD drive on Dell Vostro 3546 laptop
If you are one of those who run Virtual Box and use any other OS in it, then the base memory of the Dell Inspiron 5580 of 8 gb DDR4 RAM and an NVME PCIe SSD will still not give near good performance of Windows or the other OS in Virtual Box. The simplest solution … Continue reading Experience with upgrade of RAM memory on Dell Inspiron 5580 and Dell Inspiron 5570 laptops
The easiest way to do this is to visit the Crucial site, and scan the computer if you use Windows. However, on Linux, find out details about the RAM installed open a terminal window and enter :$ sudo dmidecode | more <enter> And scroll through the list till you get to the DIMM block. Here … Continue reading Upgrade RAM on a Dell Inspiron 5580 laptop